Long-term supply of PVC plastic water tank (accessories) 
 Factory production of PVC wave tile, plastic tile, PVC tanks, transparent tile. PVC tile large size, cost, practicality; FRP transparent tile, lighting of special good appearance and durability, energy-saving environmental protection; PVC tank and accessories complete specifications easy to install, attractive and durable products are acid and alkali. 
 PVC plastic tank specifications: (bottom * height) 
 1 sink 25CM * 28CM 
 2 tank 23CM * 25CM 
 3 sink 18CM * 20CM 
 4 tank 14CM * 16CM 
 PVC plastic tank instructions 
 1, the installation of the sink, the bottom of the supporting frame must use steel frame, sufficient enough to force the use of materials, to be in a straight line and the chassis next to 1.5 m -1.8 m each has a supporting office. Sides of the sink must have metal frame protection. 2, the sink joints or its connection, both ends of the supporting frame supporting up to have. 3, are not allowed in any part of the sink drain hole, it will affect the life of the sink, the need for special drainage fittings and pipes connected to the sewer. 4, the drain must be equipped with sufficient, it is recommended every 6 meters set a drain. 5, the larger the outside temperature changes, in order to prevent the phenomenon of heating or cooling, the proposed installation of the entire tank shall not exceed 18 meters, such as must be over, must be installed and sub-sub-drainage.